<
Sand washing machine equipment what should we do before stone washing operation? First of all, when starting up the stone washing machine, we must ensure that the equipment can work normally, and follow the inspection from end to end to ensure that the material discharge is normal, and the washing machine connected to it must be inspected from end to end. The stone machine works normally, the trommel screen works normally, the crusher works normally, and there is no abnormality in the feeder. The stone washing machine must be started without load, and then feed materials for production under the premise of ensuring that each machine can work normally. When the stone washing machine is stopped, it can only be stopped after all the feeding materials have been output. The feed particle size must be strictly followed according to the regulations. Materials larger than the regulations must not enter the equipment, otherwise it will cause a certain degree of damage to the sand washing machine. If large material particles are found during the work, they must be caught for disposal. When using a stone washing machine, just pay attention to the above points. Only by following the operating rules of the sand washing machine can the service life of the sand making equipment, the quality of the finished sand produced, and even personal safety and economy be guaranteed、 loss.